I'd like to piece together everything I'm going to need to convert my single pump to the dual Walbro setup. I already have all the fuel lines from the pump to the engine, but need everything associated with replacing the OEM pump.

What parts do you offer to simplify the installation and what all is necessary other than the pumps themselves and the insulation kit(s)?

Thanks in advance for the quick reply! I look forward to placing my order.

My apoligies, the car is a 94 TT 6-speed.

You'll need everything in this Titan Motorsports kit. I recommend the 850cc injector kit for Supras up to 800rwhp.

http://www.horsepowerfreaks.com/price/Toyota/Supra_93-98/Titan_Motorsports/Fuel/Fuel_Rails/part/6_High_Flow_Injectors_and

And a fuel pressure regulator

http://www.horsepowerfreaks.com/price/Toyota/Supra_93-98/Aeromotive/Fuel/Fuel_Pressure_Regulators/part/A1000-6_Injected_Bypass

Take care,
Chris.

I'm sorry, I don't think I worded my first post correctly.

I already have all the lines from the pump forward, a FPR, injectors, fuel rail, engine piggybacks, etc. I'm just looking to finish off the fuel system by replacing the stock pump with the Walbros. The only reason I'm asking instead of just ordering the kit is because I was told you may offer custom connectors for the electrical connections (didn't see any listed on your site) and I want to make sure I get everything during the one order.

So far, I've gathered that I'm going to need the 2 pumps themselves and the insulation kit or kits. Is there anything else I'm missing?

I again apoligize for the miscommunication. Thanks for your quick reply!

I'm sorry, I don't think I worded my first post correctly.

I already have all the lines from the pump forward, a FPR, injectors, fuel rail, engine piggybacks, etc. I'm just looking to finish off the fuel system by replacing the stock pump with the Walbros. The only reason I'm asking instead of just ordering the kit is because I was told you may offer custom connectors for the electrical connections (didn't see any listed on your site) and I want to make sure I get everything during the one order.

So far, I've gathered that I'm going to need the 2 pumps themselves and the insulation kit or kits. Is there anything else I'm missing?

I again apoligize for the miscommunication. Thanks for your quick reply!

The insulation kit is not insulation, it's a magnetic shield. That prevents the inductance from one pump from spinning the other pump in the opposite direction.

http://www.horsepowerfreaks.com/sale/performance/Fuel/Fuel_Pump_Shielding

You'll also need to wire both Walbro's in with relays. The instructions and all parts for the kit can be purchased here.

http://www.horsepowerfreaks.com/sale/HorsepowerFreaks/Fuel/Fuel_Pump_Rewire_Kits

Take care,
Chris.

Thanks very much for your quick replies Chris.

I placed my order this morning. Invoice #61054. I look forward to future purchases from HPF.

No problem. Thanks for the order.

Take care,
Chris.