JMoses
03-05-2007, 09:35 AM
About 2 years ago I thought I blew my head so I sold my supra. Well it turns out it was just the head gasket. So last week I bought it back slapped a new head gasket on it and put it back together. Well here is where the problem starts. The guy I sold it to took it apart two years ago when I sold it to him but never put it back together. Everything went together fine but I have a couple of wires and one plug that I can't find out where they go. They are located just forward of the starter and the aft knock sensor. if anyone has any pics or knows of a website with some pics I would love to get them. I know these plugs go to something because my fuel pump doesn't kick on when I turn the ignition to ACC and when I try to start the car the starter doesn't turn. I know the starter is good because it is brand new. I am open to suggestions. Let me know if you have any tips.
2fast4u
04-29-2008, 09:46 PM
ok i just put together a 86.5 supra so i should be able to talk you through it. Ok first there should be 3 connections comin from the the trans for an automatic and 2 for a manual. idk which one you have. There should be a little brown square one about 1/4 by 1/4 inch that plugs into the starter. The should be three loops that go on to the stud or positive of the starter. Ok the next question is do you have power to the car. like is the auxiliary power for the gages and such. now you need to look at the front drivers side by the coil. make shure all of the plugs are pluged in there. ok of hand there is one more thing i can think of. there is a breaker by the coil that says alt and has like 3 or 4 numbers make shure that isnt blown. if it is or it is not there you need to run a jumper between them. trust me it wont hurt the car.
supramacist
04-30-2008, 02:11 PM
You 2 lost souls can both be on the look out for pm's.
MK3-1jZ
05-01-2008, 12:29 PM
your best bet is having a professional do this..